Operating Instructions
For setting it up for the USB version cable via FTDI, it needs to install the driver and adjust the virtual comport in the system try to a suitable number which is supported by the software under using url of the FTDI briding driver.

Reference Data
- USB is not supported on Windows 95, 98 First Edition or Windows NT.
- product scheme 1 : 1 clone from original.

The USB driver for all USB-COM bridging cable can download directly from the website.

The USB-COM bridging cable here is funationally same as the COM port datacable, but with the FTDI bridging.

The USB data cables are using COM port bridging technique for software running. Due to the COM port number is self assigned by computer, it will vary with the computers to avoid conflict. Please make sure the required software can support a wide range of COM port numbers by consulting from the software supplier.

Specifications and Features:

• Make full use of service software (flash, repair etc.)
• Connect to PC USB Port
• USB interface V1.1 (max. 12Mbps)
• Transfer from PC up to 4 Mbps
• No external power supply is required
• Needs corresponding software with the simulation COM port
• Support Windows 98 / 2000 / ME / XP operation system